iv
186638-1CD
186638-1CD
Safety
GP8 EduCart
We suggest that you obtain and review a copy of the ANSI/RIA National
Safety Standard for Industrial Robots and Robot Systems (ANSI/RIA
R15.06-2012). You can obtain this document from the Robotic Industries
Association (RIA) at the following address:
Robotic Industries Association
900 Victors Way
P.O. Box 3724
Ann Arbor, Michigan 48106
TEL: (734) 994-6088
FAX: (734) 994-3338
www.roboticsonline.com
Ultimately, well-trained personnel are the best safeguard against
accidents and damage that can result from improper operation of the
equipment. The customer is responsible for providing adequately trained
personnel to operate, program, and maintain the equipment.
We recommend approved YASKAWA training courses for all personnel
involved with the operation, programming, or repair of the equipment.
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications.
DANGER
• Personnel engaged in operation, maintenance, or management of
the Robot must receive required training before using the Robot.
For more information on training, contact a local YASKAWA
representative.
• Make sure to have and follow all manuals, read them thoroughly
and understand the contents of them.
Confirm that you have all required manuals. If any of the manuals are
missing, contact a local YASKAWA representative.
• Read and understand these instructions throughly before installing,
operating, or maintaining the Robot.
Any matter not described in this manual must be regarded as
“prohibited” or “improper”.
To Next Page
Loading...
