vi
HW0482738
HW0482738
Definition of Terms Used Often in This Manual
In this manual, the equipment is designated as follows:
• Perform the following inspection procedures prior to conducting manip-
ulator teaching. If problems are found, repair them immediately,
and be sure that all other necessary processing has been performed.
-Check for problems in movement of the manipulator and servo track.
-Check for damage to insulation and sheathing of external wires.
• Read and understand the Explanation of Warning Labels before operat-
ing the robot system.
• For safety, operate under the proper lighting.
Equipment Manual Designation
Manipulator Manipulator
NXC100 Controller (ERCR-NS00-A200) NXC100
Manipulator, servo track, controller altogether Robot system
CAUTION
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
