5.2 Pin Assignments
5-2
HW0482738
HW0482738
5.2 Pin Assignments
The followings show the connector pin assignments between the NXC100 and the host sys-
tem.
Controller Front Panel
(1) X51 ETHERNET For maintenance PC connection
NXC100 Side Connector: RJ45 (Socket)
Cable Side Connector: RJ45 (Plug)
• Do not remove/insert connectors when operating the equipment or turn-
ing ON the power supply.
Failure to observe this instruction may result in electric shock, damage on the operation
circuit, or the manipulator may become uncontrollable.
Pin No. Signal Name Contents
1TX+Data
2TX-Data
3RX+Data
4 N.C. Connection Disabled
5 N.C. Connection Disabled
6RX-Data
7 N.C. Connection Disabled
8 N.C. Connection Disabled
WARNING
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
