YASKAWA Motoman NXC100 - Installation and Specifications; NXC100 Basic Specifications

4.1 NXC100 Basic Specifications
4-1
HW0482738
HW0482738
4 Installation
4.1 NXC100 Basic Specifications
Table. 1 NXC100 Specifications
Item Specifications
Applications Material handling
(The NXC100 cannot be used for arc welding.)
Basic Specifications
Input Power Supply Single-phase 200/220 VAC (50/60Hz)
Power fluctuation +/- 10 %
Frequency fluctuation +/- 2 Hz
Grounding Ground resistance 100 Ω or less
Environmental
Conditions
Operating/ Storage
Temperature
0 °C
~ +40 °C / -10 °C ~ +60 °C
Operating/ Storage
Humidity
90 %RH max. (non-condensing)
Vibration Resistance/
Shock Resistance
1 G / 5 G
Altitude 1000 m or below
Ambient Free from explosive, inflammable, and corrosive gas
Free from dirt or dust
Pollution degree 1 (IEC664-1)
Structure Self-stand, Vertically or horizontally mounted type,
Forced cooling (Air inlet from the front and top pan-
els and air outlet from the rear panel)
Approx. Mass 16 kg
Case Surface Painting (Munsell notation 5Y 7/1)
Control Section
Main Memory 128 Mbyte
Flash Disk Compact flash memory card 64 Mbyte
Extended PCI Slot 1 slot (DC5V 1A or less)
Communication RS232C (One channel)
10Base-T/ 100Base-TX (One channel)
(Communication function is set optionally.)
24/48
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com