YASKAWA MOTOMAN Series - Setting of Star; Line, Ring Connection and create radder program

5 PLC Setting
5.3 Setting of Star/ Line, Ring Connection and create radder program
5-7
HW1483854
HW1483854
5.3 Setting of Star/ Line, Ring Connection and create radder
program
Perform the following settings when connecting multiple devices and
changing the connection method (Star connection/Line connection/Ring
connection).
1. Select {Parameter} - {Network Parameter} - {Ethernet / CC IE Field}
under the project tree and check the box “Set network configuration
setting in CC IE Field configuration window”, then select {Yes}.
2. Select {CC IE Field Configuration Setting} - {CC IE Field
Configuration} - {Change Transmission Path Method} and select {Line/
Star} or {Ring}.
46/53