4 I/O Signal Allocation
4.2 External I/O Setting
4-7
HW1483854
HW1483854
4.2 External I/O Setting
1. The EXTERNAL IO SETUP window appears.
2. Select {AUTO} or {MANUAL} in the ALLOCATION MODE.
– The selection menu appears after selecting {AUTO} or {MANUAL}.
If the allocation mode is changed from {MANUAL} to
{AUTO}, the set allocation data is discarded. The data will
be allocated by AUTO MODE again. Save the set alloca-
tion data to the external devices in advance, if needed.
To Next Page
Loading...
