5 PLC Setting
5.1 Master setting
5-1
HW1483854
HW1483854
5PLC Setting
In order to use CC-Link IE field communication function, perform the
setting of the external device as master station.
Refer to the following example for setting of PLC (made by Mitsubishi
Electric Co.,Ltd.).
In this case, perform the setting by using the version 1.90U of “GX Works2
(made by Mitsubishi Electric Co.,Ltd.)”.
Please refer to the instruction manual of “GX Works2” for more details.
5.1 Master setting
1. Start the GX Works2.
2. Select [Project] - [New], perform setting as below and press [OK] to
create the new project.
3. The following initial window appears.
To Next Page
Loading...
