4 I/O Signal Allocation
4.2 External I/O Setting
4-8
HW1483854
HW1483854
3. Select the allocation mode to set up.
– Select {AUTO} to allocate I/O signal allocation automatically.
Select {MANUAL} to allocate I/O signal allocation manually.
– The selected allocation mode is set up.
4. Select {DETAIL} of {EXTERNAL IO ALLOCATION}.
– When select {AUTO}, the following procedures No.5 to 7 are not
necessary. Operate the procedure from No.8.
– When select {MANUAL], operate the following procedures No.5 to 7
accordant with the setting manually.
To Next Page
Loading...
