4 I/O Signal Allocation
4.2 External I/O Setting
4-9
HW1483854
HW1483854
5. Select the external I/O signal number (at the change source) to be
changed. (In the setting example, select “#20060”.)
– The select menu appears.
6. Select {MODIFY], and input the external input signal number (at the
change destination) to be changed. (In the setting example, enter
“#20200”.)
– The external input signal number is changed.
7. Likewise, select/modify the number of the external input signal.
– Repeat select/modify until it becomes the desired allocation to set
up.
To Next Page
Loading...
