YASKAWA MP2000 Series User Manual

iii
Using this Manual
Read this manual to ensure correct usage of the MP2000-series Machine Controller (hereinafter referred to as Machine
Controller unless otherwise specified) and the SVB-01 Module. Keep this manual in a safe place so that it can be
referred to whenever necessary.
 Manual Configuration
Read the chapters of this manual as needed.
 Symbols Used in this Manual
The symbols used in this manual indicate the following type of information.
 MPE720 Engineering Tool Version Number
In this manual, the operation of MPE720 is described using screen captures of MPE720 version 6.
For this reason, the screen captures and some descriptions may differ for MPE720 version 7.
 Terms Used to Describe “Torque”
Although the term “torque” is commonly used when describing rotary servomotors and “force” or “thrust” are used
when describing linear servomotors, this manual uses “torque” when describing both (excluding parameters).
 Indication of Reverse Signals
In this manual, the names of reverse signals (ones that are valid when low) are written with a forward slash (/) before
the signal name, as shown in the following example:
Notation Examples
• S-ON
= /S-ON
• P-CON
= /P-CON
Purpose
Chapter
Selecting Models and
Peripheral Devices
System Design
Panel Configuration and Wiring
Trial Operation
Maintenance and Inspection
1
Overview 
2
Settings and Installation 
3
Self-configuration and Created Definition Files 
4
Motion Parameters 
5
Motion Parameter Setting Examples 
6
Motion Commands 
7
Switching Commands during Execution 
8
Control Block Diagrams 
9
Absolute Position Detection 
10
Settings for Connecting Inverters 
11
Utility Functions 
12
Troubleshooting 
 This symbol is used to indicate important information that should be memorized or minor precautions,
such as precautions that will result in alarms if not heeded.

YASKAWA MP2000 Series Specifications

General

Brand	YASKAWA
Model	MP2000 Series
Category	Controller
Language	English