YASKAWA MP2000 Series - Software Limit Settings; When the Tuning-Less Function Is Enabled; Saving the Parameter Bank Data

11.8 Precautions When Using Σ-7-series SGD7S SERVOPACKs with Rotary Servomotors
11.8.5 Software Limit Settings
11-32
11.8.5 Software Limit Settings
Use the software limit setting of the Machine Controller, not that of the SGDV SERVOPACK.
11.8.6 When the Tuning-less Function is Enabled
The default servo parameter setting for the SGD7S is 1 (Tuning-less Function Selection is enabled) for Pn170.0 (Tun-
ing-less Selection).
For functions that are disabled in this state, refer to 11.7.2 When the Tuning-less Function is Enabled.
11.8.7 Saving the Parameter Bank Data
When using the Parameter Bank function, the Bank data (Pn920 to Pn95F) is not saved in the nonvolatile memory.
For details, refer to 11.7.3 Saving the Parameter Bank Data.