YASKAWA MP2000 Series - Page 405

10.4 Motion Parameter Details
10.4.2 Setting Parameter List
10-36
OW75
Transmission Reference Output Data 5
Setting range: 0 to FFFFH
This will be sent as the 6th word of the command Trans-
mission Reference.
OW76
Transmission Reference Output Data 6
Setting range: 0 to FFFFH
This will be sent as the 7th word of the command Trans-
mission Reference.
OW77
Transmission Reference Output Data 7
Setting range: 0 to FFFFH
This will be sent as the 8th word of the command Trans-
mission Reference.
OW78
Transmission Reference Output Data 8
Setting range: 0 to FFFFH
This will be sent as the 1st word of the subcommand
Transmission Reference.
OW79
Transmission Reference Output Data 9
Setting range: 0 to FFFFH
This will be sent as the 2nd word of the subcommand
Transmission Reference.
OW7A
Transmission Reference Output Data 10
Setting range: 0 to FFFFH
This will be sent as the 3rd word of the subcommand
Transmission Reference.
OW7B
Transmission Reference Output Data 11
Setting range: 0 to FFFFH
This will be sent as the 4th word of the subcommand
Transmission Reference.
OW7C
Transmission Reference Output Data 12
Setting range: 0 to FFFFH
This will be sent as the 5th word of the sub command
Transmission Reference.
OW7D
Transmission Reference Output Data 13
Setting range: 0 to FFFFH
This will be sent as the 6th word of the subcommand
Transmission Reference.
OW7E
Transmission Reference Output Data 14
Setting range: 0 to FFFFH
This will be sent as the 7th word of the subcommand
Transmission Reference.
OW7F
Transmission Reference Output Data 15
Setting range: 0 to FFFFH
This will be sent as the 8th word of the subcommand
Transmission Reference.
(cont’d)
Register No. Name Contents