5 Installation Procedure
YASKAWA ELECTRIC TOBP C730600 60C V1000 Option SI-EN3/V Installation Manual 23
5.
For IP20/Open-Chassis models, go to Step 9. on page 26.
6.
For IP20/NEMA Type 1 enclosure models CIMR-VAF, loosen the screw
on the front of the NEMA Type 1 terminal cover and remove it from the drive. Refer
to Figure 8 for details.
Refer to Figure 9 for drive models CIMR-VBA0006F to BA0018F, 2A0010F to
2A0069F, and 4A0001F to 4A0038F, which require removing the plastic terminal
cover prior to removing the NEMA Type 1 terminal cover.
Note: Installing the option on an IP20/NEMA Type 1 enclosure drive voids NEMA Type 1 protection
while maintaining IP20 conformity.
Figure 8
Figure 8 Remove the NEMA Type 1 Terminal Cover
(CIMR-VBA0001F to BA0003F, 2A0001F to 2A0006F)
To Next Page
Loading...
