APPENDIX3 LIST OF SETTINGNUMBERS
El
M)oo
INHEDTT
1: Turns
0: Turns
AFLT
1: Turns
O: Turns
ABST
1: Turns
0: Turns
DRN’f
1: Turns
O: Turns
BDTT
1: Turns
(1: Turns
DLKT
1.: Turns
0: Turns
MLKT
1.: Turns
O: Turns
SBKT
D,
on Edit Lock function.
off Edit Lock funlction.
D6
on Auxiliary Function Lock.
off Auxiliary Function Lock.
o~’Hanual Absolute function
.
off Manual Absolute function.
D,
on Dry Run function.
off h-y Run function.
DS
on Block Delete function.
off Block Delete function.
I-)2
on Display Lock function.
off Display Lock function.
UI
on Machine Lock function.
off Machine Lock function.
1.: Turns on Single Block function.
0: Turns off Single Block function.
Notes :
1.. These settings are for setting internal
toggle switches.
2. Wheneach switch is provided with machine
control station, the logical sum of these
settings and toggle switch setting deter-
mines function orJoff state.
Internal
toggle switch
OFF ON
k
OFF ON
Toggle switch
OFF OFF
ON ON
on machine
Resultant
ON/OFFstate
OFF ON
ON ON
IIElEIEIIEEIEI
BUZONDv
1:
0:
The
G38
SLT
1:
0:
The
G36
Turns on touch buzzer (key switch on oper-
ator’s panel).
Turns off touch buzzer.
3: DZ
Effective on the third Stored Stroke Limit.
Ineffective on the third Stored stroke
Limit.
value of limit automatically changes by
or G39 commandin part program.
2: D,
Effective on the second Stored Stroke Lim-
i t.
Ineffective on the second Stored Stroke
Limit.
value of limit automatically changes by
or G37 commandin part program.
INCHMM
DO
1:
Selects inch input increment.
O: Selects metric input increment.
ISOEIA
D7
1:
Punches out tape code with 1S0 code.
O: Punches out tape code with EIA code.
TVCHKDb
1: Executes TV check.
O: Does not execute TVcheck.
“-lo4-
To Next Page
Loading...
