4.3.13 EDIT DOESNOTFUNCTION
Trouble
Failure of input sigr
!lode input) is n[
cc,rrect.
Edit lock is input.
Parameter setting
Connection & materia
failure
Ol,her failures
Check Procedure
~#1300 D, should be 1 and all #1300
Do to Db should beO.
#1303 D~ should he O and SET
116000DTshould be O.
Operator tries to edit number O that
cannot edit data.
08000 to 08999 m
#6002 Dd: Edit interlock
#6004 Dz: Edit, display and output
interlock
09000 to 090000 m
#6002 DFj:Edit interlock
#6021 D~: Edit, display and output
interlock
Alarm 010 lights if operator tries to
edit.
The program characters registered turn
to other characters.
Key entry is not made correctly.
Key entry turns to other characters.
The trouble caused by exceeding memory
capacity or by exceeding number of
registered programs.
Check the number of characters left and
number of registered programs by alarm
directory screen.
Solution
Check mode input rotary
switch, etc.
Release edit lock input.
Release
ting.
Release
ting and
nterlock for set-
nterlock for set-
parameter.
Failure of CMOSmemory
Replace MB20.
Replace MM21in case of
mass storage.
Failure of keyboard
Failure of SP20
Plug-in failure of S1’20
flat cable
Erase the program with
Oxxxxplilg
–40–
To Next Page
Loading...
