YASKAWA yasnac lx3 - Page 79

Code Causes
096
PROGERROR(G70-76/G72-78)
D (CUTTINGFREQUENCY)SPECIFIEDBYG73 ZER
OR128 ORMORE. 1, K (ROUGflCUTTING)SPEC
FIED BYG73 BOTHZERO. D, K OF G76 EXCEED
INGPROGRAMMABLERANGE.
SEE TOE-C843-9.20 PAR.2.8.25.4,
PAR.2.8.25.8.
097
PROGERROR(G70-76/G72-78)
FOURORMOREPROCESSINGINTERRUPTIONSBY
FINISHEDSHAPEPROGRAMIN STOCKREMOVAL
CYCLEBYG71, ORG72 RI.
SEE TOE-C843-9.20 PAR.2.8.25.2(2)
—
098
PROGERROR(G70-76/G72-78)
DATASPECIFIEDBYG70 P, Q NOTREGISTERED
IN INTERNALKEEPMEMORY.
SEE TOE-C843-9. 20 PAR.2.8.25. 5(3)
099
PROGERROR(G70-76/G72-78)
UNUSABLEADDRESSESSPECIFIEDIN G70 TOG76
BLOCKS. ADDRESSREQUIREDIN THEBLOCKNOT
SPECIFIED.
CHECKFORHATANDCORRECTPROGRAM.
100
CALERROR(FIXEDPOINT)
MAGNITUDEOF FIXEDPOINTDATABYCALCULA-
TIONEXCEEDINGUPPERLIMIT.
RECHECKPROGRAM.
101
CALI?RROR(FLOATING)
EXPONENTOF FLOATINGPOINTDATABYCALCULA-
TIONEXCEEDINGALLOWABLERANGE.
RECHECKPROGRAM.
Code
Causes
102
CALERROR(DIVISION)
CALCULATIONDIVISORZEROOROVERFLOWERROR.
CORRECTPROGRAM.
103
CALERROR(SQUAREROOT)
ROOTVALUEIS A NEGATIVE~ ( –)
CORRECTPROGRAM.
104
PROGERROR(DOUIILEADR)
CHARACTERWHICHCANNOTBE REPEATEDIN A
BLOCKCOMMANDIN REPETITION.
CORRECTPROGRAM.
105
MACROERROR(CONSTANT)
CONSTANTSEXCEEDINGTHELIMIT.
SEE TOE-C843-9.20 PAR.2.8.23.1O (1) b,c,
ANDCORRECTPROGRAM.
106
MACROERROR
TOOMANYCODESFORCANCELLINGG67.
CHECKNUMBERSOF G66 ANDG67 ANDCORRECT
PROGRAM.
107
MACROERROR(FORMAT)
ERRORIN THEFORMATEXCEPTFOREQUATION.
SEE TOE-C843-9.20 PAR.2.8.23 ANDCORRECT
PROGRAM.