User Guide for the SIP-T19(P) E2 IP Phone
90
5. (Optional.) Enter the park retrieval number in the Park Retrieve Code field.
It is configured for the Retrieve soft key.
6. Click Confirm to accept the change.
Note
To park a call in Transfer mode:
1. During a call, press the Park soft key (You may need to press the More soft key to
see the Park soft key).
- If the call park number is not configured, you need to enter the call park
number (e.g., *01).
Press , or the Park soft key. The call will be transferred to the
directional parking lot where the call park number directed to.
- If the call park number is configured, the call will be directly transferred to the
directional parking lot where the call park number directed to.
If the Park or Retrieve soft key doesn’t appear on the LCD screen, please select
Disabled from the pull-down list of Custom Softkey via web user interface at path
Settings->Softkey Layout.
To Next Page
Loading...
Need help?
General