Yealink SIP-T19 E2

Advanced Phone Features
109
2. Enter the call pull feature access code (e.g., *11) in the Call Pull Feature Access
Code field.
3. Click Confirm to accept the change.
The phone will dial out ―*11‖ automatically when you press the CallPull soft key.
This section provides you with detailed information on using the SIP-T19(P) E2 IP phone in
a SCA scenario.
You can do the following using SIP-T19(P) E2 IP phone in a SCA scenario:
 Placing calls
 Answering calls
 Place a call on hold
 Retrieving a held call
 Call Pull
You can have one call or multiple calls on the shared line.
To place a call on the shared line:
1. Enter the desired number using the keypad when the phone is idle.
2. Press , , or the Send soft key.