User Guide for the SIP-T19(P) E2 IP Phone
2
Hardware component instructions of the SIP-T19(P) E2 IP phone are:
Shows information about calls, messages, soft keys,
time, date and other relevant data:
• Call information—caller ID, call duration
• Icons (for example, )
• Missed call text or second incoming caller information
• Prompt text (for example, "Saving config file!")
• Time and date
Indicates phone power status and phone status:
• Receives an incoming call—Fast flashing
• Receives a voice mail or text message—Slow flashing
Label automatically to identify their context-sensitive
features.
Scroll through the displayed information.
Confirms actions or answers incoming calls.
Toggles the headset mode.
Mutes or un-mutes an active call.
Transfers a call to another party.
Toggles the hands-free speakerphone mode.
Redials a previously dialed number.
Adjusts the volume of the handset, headset, speaker,
and ringer.
Provides the digits, letters and special characters in
context-sensitive applications.
Provides hands-free (speakerphone) audio output.
Secures the handset in the handset cradle when the IP
phone is mounted vertically. For more information on
how to adjust the hookswitch tab, refer to
Yealink Wall
Mount Quick Installation Guide for Yealink IP Phones
.
Picking up the handset from the handset cradle, the
hookswitch bounces and the phone connects to the line,
laying the handset down on the handset cradle, the
phone disconnects from the line.
To Next Page
Loading...
Need help?
General