User Guide for the SIP-T19(P) E2 IP Phone
130
2. Select the desired value (Optional or Compulsory) from the pull-down list of RTP
Encryption(SRTP).
3. Click Confirm to accept the change.
Note
How to export PCAP trace?
We may need you to provide a PCAP trace to help analyze your problem.
To export a PCAP trace via web user interface:
1. Click on Settings->Configuration.
2. Click Start to begin capturing signal traffic.
3. Recreate the error to be documented in the trace.
4. Click Stop to stop the capture.
SRTP is not available on all servers. Contact your system administrator for more
information.
SRTP is configurable via web user interface only.
To Next Page
Loading...
Need help?
General