User Guide for the SIP-T19(P) E2 IP Phone
32
2. In the Directory block, select the desired list from the Disabled column and then
click .
The selected list appears in the Enabled column.
3. Repeat the step 2 to add more lists to the Enabled column.
4. To remove a list from the Enabled column, select the desired list and then click .
5. To adjust the display order of enabled lists, select the desired list and then click
or .
The LCD screen displays the list(s) in the adjusted order.
6. Click Confirm to accept the change.
Note
To check the directory via phone user interface:
1. Press the Dir soft key when the phone is idle.
The LCD screen displays the enabled list(s) in the directory.
If there is only one list in the directory, press the Dir soft key to enter this list directly.
Note
Directory is configurable via web user interface only.
If the remote phone book is not configured in advance, you cannot see remote phone
book list on the phone user interface. For more information on remote phone book, refer
to Remote Phone Book on page 44.
To Next Page
Loading...
Need help?
General