User Guide for the SIP-T19(P) E2 IP Phone
36
The IP phone enters the local directory directly as there is only Local Directory
enabled in the directory by default.
If Local Directory is removed from the directory (refer to Directory on page 31),
press Menu->Directory->Local Directory to enter the local directory.
2. Select the desired contact group and then press the Enter soft key.
If the contact is not in any group, select All Contacts and then press the Enter soft
key.
3. Press the Add soft key.
4. Enter the name and the office, mobile or other numbers in the corresponding fields.
5. Press or , or the Switch soft key to select the desired ring tone from the
Ring field.
If Auto is selected, this contact will use the ring tone according to the priority:
Group ring tone (refer to Adding Groups) >Account ring tone (refer to Ring
Tones)>Phone ring tone (refer to Ring Tones).
6. Press or , or the Switch soft key to select the desired group from the Group
field.
7. Press the Add soft key to accept the change or the Back soft key to cancel.
Note
Adding Contacts from Call History
To add a contact to the local directory from the call history:
1. Press the History soft key.
2. Press or to highlight the desired entry.
If the contact has existed in the directory, the LCD screen will prompt ―Contact name
existed!‖.
To Next Page
Loading...
Need help?
General