EasyManuals Logo

Yealink SIP-T31G Administrator's Guide

Yealink SIP-T31G
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #137 background imageLoading...
Page #137 background image
Using Handsets with T57W/T54W/T53W/T53 Phones
133
Parameter
base.double_pin_code.enable <y0000000000xx>.cfg
Description
It enables or disables double PIN feature.
Permitted
Values
0-Disabled, users use the PIN configured by "base.pin_code" to register the handset or access some
features.
1-Enabled, users use the PIN configured by "base.pin_code_for_register" to register the handset, and
use the PIN configured by "base.pin_code" to access some features.
Default
0
Parameter
base.pin_code_for_register <y0000000000xx>.cfg
Description
It configures the PIN for registering or de-registering a handset.
Note: It works only if “base.double_pin_code.enable” is set to 1 (Enabled).
Permitted
Values
Integer from 0000 to 9999
Default
0000
DECT Intercom
Intercom is a useful feature in an office environment to quickly connect with the operator or the secretary. Users can
make internal intercom calls and external intercom calls on the handset. Internal intercom calls are made among
handsets registered to the same phone.
The handset can automatically answer an incoming external intercom call and play warning tone.
Topic
DECT Intercom Configuration
DECT Intercom Configuration
The following table lists the parameters you can use to configure DECT intercom.
Parameter
custom.handset.auto_intercom <y0000000000xx>.cfg
Description
It enables or disables the auto intercom feature on the handset.
Permitted
Values
-1-Do not modify the configuration.
0-Off, auto intercom feature is disabled. Users need to answer incoming internal intercom calls manu-
ally.
1-On(Beep Off), the phone/handset answers an incoming internal intercom call automatically without
a warning tone.
2-On(Beep On), the phone/handset answers an incoming internal intercom call automatically and
plays a warning tone. It works when the silence mode is off.
Default
-1
Handset UI
OK > Settings > Telephony > Auto Intercom
Phone UI
T57W/T54W:
Menu > DECT Settings > Auto Intercom > Auto Intercom
T53W/T53:
Menu > Settings > DECT Settings > Auto Intercom > Auto Intercom

Table of Contents

Other manuals for Yealink SIP-T31G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T31G and is the answer not in the manual?

Yealink SIP-T31G Specifications

General IconGeneral
Mounting kitYes
Number of handles included1 pc(s)
Display diagonal2.3 \
Display resolution132 x 64 pixels
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Voice codecsG.722, G.729, AGC, G.729A, AJB, PLC, G.711Mu, VAD, G.711a, G.723.1, G.726, iLBC, CNG, OPUS
AC adapter input voltage100 - 240 V
AC adapter output current0.6 A
AC adapter output voltage5 V
Power consumption (typical)3 W
Lines quantity2 lines
Phonebook capacity1000 entries
Number of VoIP accounts2
Sustainability certificatesRoHS, REACH
Networking standardsIEEE 802.3af, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1x
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth189 mm
Width188 mm
Height162 mm
Package depth210 mm
Package width213 mm
Package height103 mm

Related product manuals