EasyManuals Logo

Yealink SIP-T31G Administrator's Guide

Yealink SIP-T31G
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #66 background imageLoading...
Page #66 background image
Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
62
Default
1
Supported
Devices
T57W, T54W, T53W, T53, T48U, T46U, T43U, T42U, T48S, T46S, T42S, T41S, T27G and CP920
Web UI
Network > Advanced > VPN > Mode
Parameter
static.network.l2tp_server.address
[1]
<y0000000000xx>.cfg
Description
It configures the L2TP server address.
Note: It works only if "static.network.vpn.mode" is set to 0 (L2TP).
Permitted
Values
String within 512 characters
Default
Blank
Supported
Devices
T57W, T54W, T53W, T53, T48U, T46U, T43U, T42U, T48S, T46S, T42S, T41S, T27G and CP920
Web UI
Network > Advanced > VPN > Layer 2 Tunneling Protocol(L2TP) > L2TP Server Address
Parameter
static.network.l2tp_server.username
[1]
<y0000000000xx>.cfg
Description
It configures the user name of the L2TP server.
Note: It works only if "static.network.vpn.mode" is set to 0 (L2TP).
Permitted
Values
String within 512 characters
Default
Blank
Supported
Devices
T57W, T54W, T53W, T53, T48U, T46U, T43U, T42U, T48S, T46S, T42S, T41S, T27G and CP920
Web UI
Network > Advanced > VPN > Layer 2 Tunneling Protocol(L2TP) > Authentication Name
Parameter
static.network.l2tp_server.password
[1]
<y0000000000xx>.cfg
Description
It configures the password of the L2TP server.
Note: It works only if "static.network.vpn.mode" is set to 0 (L2TP).
Permitted
Values
String within 512 characters
Default
Blank
Supported
Devices
T57W, T54W, T53W, T53, T48U, T46U, T43U, T42U, T48S, T46S, T42S, T41S, T27G and CP920
Web UI
Network > Advanced > VPN > Layer 2 Tunneling Protocol(L2TP) > Authentication Password
[1]
If you change this parameter, the phone will reboot to make the change take effect.
Example: Using VPN based on L2TP Prototol
Before you begin
You have set up the L2TP VPN server.
Procedure
1.
Set the following parameters in the configuration file and perform an auto provisioning.
#Set the VPN type to L2TP.
static.network.vpn.mode = 0

Table of Contents

Other manuals for Yealink SIP-T31G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T31G and is the answer not in the manual?

Yealink SIP-T31G Specifications

General IconGeneral
Mounting kitYes
Number of handles included1 pc(s)
Display diagonal2.3 \
Display resolution132 x 64 pixels
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Voice codecsG.722, G.729, AGC, G.729A, AJB, PLC, G.711Mu, VAD, G.711a, G.723.1, G.726, iLBC, CNG, OPUS
AC adapter input voltage100 - 240 V
AC adapter output current0.6 A
AC adapter output voltage5 V
Power consumption (typical)3 W
Lines quantity2 lines
Phonebook capacity1000 entries
Number of VoIP accounts2
Sustainability certificatesRoHS, REACH
Networking standardsIEEE 802.3af, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1x
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth189 mm
Width188 mm
Height162 mm
Package depth210 mm
Package width213 mm
Package height103 mm

Related product manuals