Yealink SIP-T31G Administrator's Guide

Configuration Parameters
536
Permitted
Values
0-Disabled, the phone sends the keep-alive packets based on the account
1-Enabled
Default
1
Parameter
sip.sdp_early_answer_or_offer <y0000000000xx>.cfg
Description
It enables or disables the phone to generate an SDP Offer or Answer message when receiving a reli-
able provisional response or PRACK request and response.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
sip.reliable_protocol.timerae.enable <y0000000000xx>.cfg
Description
It enables or disables the timer for ict and nict when TCP protocol is used.
Note: This parameter can be used for fast failover purpose when TCP connection fails.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
sip.mac_in_ua <y0000000000xx>.cfg
Description
It enables or disables the phone to carry the MAC address information in the User-Agent header.
Permitted
Values
0-Disabled
1-Enabled, the phone will carry the MAC address with colons (for example 00:15:65:7f:fb:7e) in the
User-Agent header.
2-Enabled, the phone will carry the MAC address without colons (for example 0015657ffb7e) in the
User-Agent header.
Default
0
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T33P/T33G, X=1-4; for
T40P/T40G/T23P/T23G, X=1-3; for T31P/T31G/T31/T21(P) E2, X=1-2; for T30P/T30/T19(P) E2/CP920, X=1.
[2]
If you change this parameter, the phone will reboot to make the change take effect.
Call Settings Parameters
Parameter
phone_setting.show_code403 <y0000000000xx>.cfg
Description
It configures the display message on the phone screen when receiving a 403 message.
If it is left blank, the phone will display the value sent from the server when receiving the 403 mes-
sage.
Permitted
Values
String within 99 characters
Default
Blank
Parameter
phone_setting.incoming_call_when_dial-
ing.priority
<y0000000000xx>.cfg
Description
It enables or disables the phone to interrupt the user operation when there is an incoming call.
Permitted
Values
0-Disabled, the phone will not prompt the incoming call information when the user is dialing or select-
ing a contact from the directory/call log lists to transfer a call/to set up a conference/to place a new
call.

Yealink SIP-T31G Specifications

General

Mounting kit	Yes
Number of handles included	1 pc(s)
Display diagonal	2.3 \
Display resolution	132 x 64 pixels
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Voice codecs	G.722, G.729, AGC, G.729A, AJB, PLC, G.711Mu, VAD, G.711a, G.723.1, G.726, iLBC, CNG, OPUS
AC adapter input voltage	100 - 240 V
AC adapter output current	0.6 A
AC adapter output voltage	5 V
Power consumption (typical)	3 W
Lines quantity	2 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	2
Sustainability certificates	RoHS, REACH
Networking standards	IEEE 802.3af, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1x
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	189 mm
Width	188 mm
Height	162 mm
Package depth	210 mm
Package width	213 mm
Package height	103 mm