EasyManuals Logo

Yealink SIP-T31G Administrator's Guide

Yealink SIP-T31G
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #569 background imageLoading...
Page #569 background image
Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
565
For example, if you set the Always Forward on code to be *78 (may vary on different servers), and the target number
to be 201. When you enable Always Forward on the IP phone, the phone sends *78201 to the server, and then the
server will enable Always Forward feature on the server side, hence being able to get the right status of the exten-
sion.
For anonymous call/anonymous call rejection feature, the phone will send either the on code or off code to the
server according to the value of Send Anonymous Code/Send Rejection Code.
The difference between RFC 2543 Hold enabled and disabled
Capturing packets after you enable the RFC 2543 Hold feature. SDP media direction attributes (such as a=se-
endonly) per RFC 2543 is used in the INVITE message when placing a call on hold.
Capturing packets after you disable the RFC 2543 Hold feature. SDP media connection address c=0.0.0.0 per RFC
3264 is used in the INVITE message when placing a call on hold.
The difference between Shared Call Appearance (SCA) and Bridge Lines
Appearance (BLA)
SCA and BLA are similar signaling methods that enable more than one phone to share a SIP line. The method you
use varies with the SIP server you are using. In the configuration files, the relevant configuration parameters of SCA
and BLA are different. The barge-in and call pull feature are not available with BLA, but they are available with
SCA.

Table of Contents

Other manuals for Yealink SIP-T31G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T31G and is the answer not in the manual?

Yealink SIP-T31G Specifications

General IconGeneral
Mounting kitYes
Number of handles included1 pc(s)
Display diagonal2.3 \
Display resolution132 x 64 pixels
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Voice codecsG.722, G.729, AGC, G.729A, AJB, PLC, G.711Mu, VAD, G.711a, G.723.1, G.726, iLBC, CNG, OPUS
AC adapter input voltage100 - 240 V
AC adapter output current0.6 A
AC adapter output voltage5 V
Power consumption (typical)3 W
Lines quantity2 lines
Phonebook capacity1000 entries
Number of VoIP accounts2
Sustainability certificatesRoHS, REACH
Networking standardsIEEE 802.3af, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1x
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth189 mm
Width188 mm
Height162 mm
Package depth210 mm
Package width213 mm
Package height103 mm

Related product manuals