EasyManuals Logo

Yealink SIP-T31G Administrator's Guide

Yealink SIP-T31G
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #141 background imageLoading...
Page #141 background image
Using Handsets with T57W/T54W/T53W/T53 Phones
137
Web UI
Status > Handset > Satellite Mode > Select Handset
Phone UI
T57W/T54W:
Menu > DECT Settings > Satellite Mode > Select handset
T53W/T53:
Menu > Settings > DECT Settings > Satellite Mode > Select handset
Parameter
features.ms.X.mode
[1]
<y0000000000xx>.cfg
Description
It configures the satellite mode for the phone.
Note: It works only if “features.ms.X.slave_handset_number” is configured correctly.
Permitted
Values
0-Busy, users cannot switch the active call between the phone and handset. Regardless of the phone
or the handset, the device which is during the call can initiate a new call. If users not in a call try to ini-
tiate a call on the phone/handset, the phone/handset will prompt "Path Busy".
1-Take over call, when the handset is during the call, users can retrieve the call after off-hook on the
phone. When the phone is during the call, users can push the call to the handset.
Default
1
Web UI
Status > Handset > Satellite Mode > Mode
Phone UI
T57W/T54W:
Menu > DECT Settings > Satellite Mode > Select mode
T53W/T53:
Menu > Settings > DECT Settings > Satellite Mode > Select mode
[1]
X is the handset ID. X is equal to 1.
Example: Configuring the Satellite Mode Feature
You can configure the satellite mode only when one handset is registered to the phone.
The following table lists the supported phones and handsets:
Phone Handset
T57W
T54W
T53W
T53
W53H
W56H
As an example, two W56H handsets along with two T54W phones are in use.

Table of Contents

Other manuals for Yealink SIP-T31G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T31G and is the answer not in the manual?

Yealink SIP-T31G Specifications

General IconGeneral
Mounting kitYes
Number of handles included1 pc(s)
Display diagonal2.3 \
Display resolution132 x 64 pixels
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Voice codecsG.722, G.729, AGC, G.729A, AJB, PLC, G.711Mu, VAD, G.711a, G.723.1, G.726, iLBC, CNG, OPUS
AC adapter input voltage100 - 240 V
AC adapter output current0.6 A
AC adapter output voltage5 V
Power consumption (typical)3 W
Lines quantity2 lines
Phonebook capacity1000 entries
Number of VoIP accounts2
Sustainability certificatesRoHS, REACH
Networking standardsIEEE 802.3af, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1x
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth189 mm
Width188 mm
Height162 mm
Package depth210 mm
Package width213 mm
Package height103 mm

Related product manuals