EasyManuals Logo

Yealink SIP-T31G Administrator's Guide

Yealink SIP-T31G
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #49 background imageLoading...
Page #49 background image
Network Configurations
45
Default
1
Supported
Devices
T53, T48U, T48S, T48G, T46U, T46S, T46G, T43U, T42U, T42S, T41S, T29G, T27G
[1]
If you change this parameter, the phone will reboot to make the change take effect.
[2]
X is Wi-Fi ID. X=1-5.
Wireless Network IP Addressing Mode Configuration
The following table lists the parameters you can use to configure IP addressing mode for the wireless network.
Parameter
static.network.wifi.ip_address_mode
[1]
<y0000000000xx>.cfg
Description
It configures the IP addressing mode for the wireless network.
Permitted
Values
0-IPv4
1-IPv6
2-IPv4 & IPv6
Default
0
Supported
Devices
T57W, T54W, T53W, T53, T48U, T48S, T46U, T46S, T43U, T42U, T42S, T41S, T27G, CP920
Web UI
Network > Wi-Fi > Internet Port > Mode (IPv4/IPv6)
Phone UI
Color Screen Phones:
Menu > Advanced (default password: admin) > Network > Wi-Fi Port > IP Mode
Black-and-white Screen Phones:
Menu > Settings > Advanced Settings (default password: admin) > Network > Wi-Fi Port > IP Mode
Parameter
static.network.wifi.preference
[1]
<y0000000000xx>.cfg
Description
It specifies IPv4 or IPv6 as the preferred wireless network in a Dual-Stack mode.
Note: It works only if “static.network.wifi.ip_address_mode” is set to 2 (IPv4 & IPv6).
Permitted
Values
0-IPv6
1-IPv4
Default
0
Supported
Devices
T57W, T54W, T53W, T53, T48U, T48S, T46U, T46S, T43U, T42U, T42S, T41S, T27G, CP920
Web UI
Network > Wi-Fi > Internet Port > Preference(IPv4/IPv6)
Phone UI
Color Screen Phones:
Menu > Advanced (default password: admin) > Network > Wi-Fi Port > Preference
Black-and-white Screen Phones:
Menu > Settings > Advanced Settings (default password: admin) > Network > Wi-Fi Port > Preference
[1]
If you change this parameter, the phone will reboot to make the change take effect.
IPv4 Wireless Network Configuration
The following table lists the parameters you can use to configure IPv4 wireless network.
Parameter
static.network.wifi.internet_port.type
[1]
<y0000000000xx>.cfg

Table of Contents

Other manuals for Yealink SIP-T31G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T31G and is the answer not in the manual?

Yealink SIP-T31G Specifications

General IconGeneral
Mounting kitYes
Number of handles included1 pc(s)
Display diagonal2.3 \
Display resolution132 x 64 pixels
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Voice codecsG.722, G.729, AGC, G.729A, AJB, PLC, G.711Mu, VAD, G.711a, G.723.1, G.726, iLBC, CNG, OPUS
AC adapter input voltage100 - 240 V
AC adapter output current0.6 A
AC adapter output voltage5 V
Power consumption (typical)3 W
Lines quantity2 lines
Phonebook capacity1000 entries
Number of VoIP accounts2
Sustainability certificatesRoHS, REACH
Networking standardsIEEE 802.3af, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1x
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth189 mm
Width188 mm
Height162 mm
Package depth210 mm
Package width213 mm
Package height103 mm

Related product manuals