Yealink SIP-T31G Administrator's Guide

Audio Features
188
Note: You can configure the softkey layout feature to display the RTP Status soft key during the conference. Then you can
press the RTP Status soft key to check the voice quality data with different parties. For more information, refer to Softkey
Layout.
Topic
VQ-RTCPXR Display Configuration
VQ-RTCPXR Display Configuration
The following table lists the parameters you can use to configure VQ-RTCPXR display.
Parameter
phone_setting.vq_rtcpxr.states_show_on_web.enable <y0000000000xx>.cfg
Description
It enables or disables the voice quality data of the last call to be displayed on the web interface at the
path Status > RTP Status.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Web UI
Settings > Voice Monitoring > Display Report Options on Web
Parameter
phone_setting.vq_rtcpxr.states_show_on_gui.enable <y0000000000xx>.cfg
Description
It enables or disables the voice quality data of the last call or current call to be displayed on the
phone screen. You can view the voice quality data of the last call on the phone at the path Menu >
Status > More > RTP (RTP Status). You can view the voice quality data of the current call by press-
ing RTP/RTP Status soft key during a call.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Web UI
Settings > Voice Monitoring > Display Report Options on Phone
Parameter
phone_setting.vq_rtcpxr_display_start_time.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display Start Time on the phone screen.
Note: It works only if “phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Settings > Voice Monitoring > Report Options on Phone > Start Time
Parameter
phone_setting.vq_rtcpxr_display_stop_time.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display Current Time or Stop Time on the phone screen.
Note: It works only if “phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Settings > Voice Monitoring > Report Options on Phone > Current Time
Parameter
phone_setting.vq_rtcpxr_display_local_call_id.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display Local User on the phone screen.

Yealink SIP-T31G Specifications

General

Mounting kit	Yes
Number of handles included	1 pc(s)
Display diagonal	2.3 \
Display resolution	132 x 64 pixels
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Voice codecs	G.722, G.729, AGC, G.729A, AJB, PLC, G.711Mu, VAD, G.711a, G.723.1, G.726, iLBC, CNG, OPUS
AC adapter input voltage	100 - 240 V
AC adapter output current	0.6 A
AC adapter output voltage	5 V
Power consumption (typical)	3 W
Lines quantity	2 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	2
Sustainability certificates	RoHS, REACH
Networking standards	IEEE 802.3af, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1x
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	189 mm
Width	188 mm
Height	162 mm
Package depth	210 mm
Package width	213 mm
Package height	103 mm