Yealink SIP-T40G Administrator's Guide

Directory
331
Parameter
ldap.password <y0000000000xx>.cfg
Description
It configures the password to log into the LDAP server.
This parameter can be left blank in case the server allows anonymous to log into. Otherwise, you will
need to provide the password to log into the LDAP server.
Permitted
Values
String within 99 characters
Default
Blank
Web UI
T57W/T54W/T53W/T53/T48U/T46U/T43U/T42U:
Directory > LDAP > LDAP Password
Other Phones:
Directory > LDAP > Password
Parameter
ldap.max_hits <y0000000000xx>.cfg
Description
It configures the maximum number of search results to be returned by the LDAP server.
If the value of the “Max.Hits” is blank, the LDAP server will return all searched results. Please note that
a very large value of the “Max. Hits” will slow down the LDAP search speed, therefore it should be con-
figured according to the available bandwidth.
Permitted
Values
Integer from 1 to 1000
Default
50
Web UI
Directory > LDAP > Max Hits (1~1000)
Parameter
ldap.name_attr <y0000000000xx>.cfg
Description
It configures the name attributes of each record to be returned by the LDAP server. It compresses the
search results. You can configure multiple name attributes separated by spaces.
Example:
ldap.name_attr = cn sn
This requires the “cn” and “sn” attributes set for each contact record on the LDAP server.
Permitted
Values
String within 99 characters
Default
Blank
Web UI
Directory > LDAP > LDAP Name Attributes
Parameter
ldap.numb_attr <y0000000000xx>.cfg
Description
It configures the number attributes of each record to be returned by the LDAP server and display them
to the phone in the order of the configured attributes..
Multiple number attributes are separated by spaces.
Permitted
Values
String within 99 characters
Default
Blank
Case Scen-
ario
Contacts and attribute values on the LDAP server are configured as follows:
user0005-telephoneNumber (2598), mobile (13048957895)
user0006-telephoneNumber (3598), mobile (15956524892)
user0007-telephoneNumber (4598), mobile (blank)

Yealink SIP-T40G Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Wall mountable	Yes
Wi-Fi	No
Security algorithms	AES, HTTPS, SSL/TLS
Networking standards	IEEE 802.3af
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	FTP, TFTP, HTTP, HTTPS
Voice codecs	G.711, G.711a, G.711u, G.722, G.726, G.729ab
RJ-11 ports quantity	1
Ethernet LAN (RJ-45) ports	2
AC adapter input voltage	100 - 240 V
AC adapter output current	0.6 A
AC adapter output voltage	5 V
Power consumption (typical)	1.6 W
Certification	CE, FCC, ISO 9001
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 90 %
Volume control	Digital
Display diagonal	2.3 \
Display resolution	132 x 64 pixels
Lines quantity	3 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	175 mm
Width	212 mm
Height	54 mm