EasyManuals Logo

Yealink SIP-T40G Administrator's Guide

Yealink SIP-T40G
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #335 background imageLoading...
Page #335 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
332
user0007-telephoneNumber (blank), mobile (18954125624)
Set the following:
ldap.numb_attr = telephoneNumber mobile
This requires the "telephoneNumber" and “mobile” attributes set for each contact record on the LDAP
server. And the phone screen will display the number in the order of the configured attributes (tele-
phoneNumber > mobile).
Results:
user0005 2598
user0006 3598
user0007 4598
user0008 18954125624
Web UI
Directory > LDAP > LDAP Number Attributes
Parameter
ldap.display_name <y0000000000xx>.cfg
Description
It configures the display name of the contact record displayed on the phone screen.
The value must start with a “%” symbol.
Example:
ldap.display_name = %cn
The cn of the contact record is displayed on the phone screen.
Permitted
Values
String within 99 characters
Default
Blank
Web UI
Directory > LDAP > LDAP Display Name
Parameter
ldap.version <y0000000000xx>.cfg
Description
It configures the LDAP protocol version supported by the IP phone. The version must be the same as
the version assigned on the LDAP server.
Permitted
Values
2 or 3
Default
3
Web UI
Directory > LDAP > Protocol
Parameter
ldap.call_in_lookup <y0000000000xx>.cfg
Description
It enables or disables the phone to perform an LDAP search when receiving an incoming call.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Web UI
Directory > LDAP > LDAP Lookup for Incoming Call
Parameter
ldap.call_out_lookup <y0000000000xx>.cfg
Description
It enables or disables the phone to perform an LDAP search when placing a call.
Permitted
Values
0-Disabled
1-Enabled

Table of Contents

Other manuals for Yealink SIP-T40G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T40G and is the answer not in the manual?

Yealink SIP-T40G Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Wall mountableYes
Wi-FiNo
Security algorithmsAES, HTTPS, SSL/TLS
Networking standardsIEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP, TFTP, HTTP, HTTPS
Voice codecsG.711, G.711a, G.711u, G.722, G.726, G.729ab
RJ-11 ports quantity1
Ethernet LAN (RJ-45) ports2
AC adapter input voltage100 - 240 V
AC adapter output current0.6 A
AC adapter output voltage5 V
Power consumption (typical)1.6 W
CertificationCE, FCC, ISO 9001
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 90 %
Volume controlDigital
Display diagonal2.3 \
Display resolution132 x 64 pixels
Lines quantity3 lines
Phonebook capacity1000 entries
Number of VoIP accounts3
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth175 mm
Width212 mm
Height54 mm

Related product manuals