Yealink SIP-T42G User Manual

User Guide for the SIP-T42G IP Phone
120
To initiate a Skype for Business conference call by meet now from the Skype for Business
client:
1. Click on the Skype for Business client, and then select Meet Now.
You will initiate a Skype for Business conference call directly.
2. Click to enter the number or name of the third party, and then click OK to invite
a new call to the Skype for Business conference.
You can also enter the first few characters of the contact name or the contact
number. Then select the desired contact from the result list, the call will be placed
directly.
3. Repeat the step 2 to add more parties to the conference.
You can view the dial-in number and conference ID when you initiate or join a Skype for
Business conference.
To view the dial-in number and conference ID via phone user interface:
1. During a Skype for Business conference, press More->Conf Info to view the dial-in
number and conference ID.
2. Notify other parties of the dial-in number and conference ID, other parties can use
the dial-in number and conference ID to join this Skype for Business conference. If
this conference is locked, anyone that tries to join the call will enter the lobby until
the organizer or presenters accept(s) the call. For more information, refer to
Locking or Unlocking the Conference on page 125.

Yealink SIP-T42G Specifications

General

Power requirements	100-240V, DC 5V
Power over Ethernet (PoE)	Yes
Touchscreen	-
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Voice codecs	G.711, G.723, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black, Grey
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	175 mm
Width	212 mm
Height	189 mm