Yealink SIP-T42G User Manual

Better Together over Ethernet
149
After the software has completed installing, a dialog is displayed as below:
The checkbox of Run Yealink BToE Connector 3.0.0.10 is checked by default, as
shown above. If the checkbox of Run Yealink BToE Connector 3.0.0.10 is not
checked, you need to start the Yealink BToE Connector manually.
8. Click Finish.
The Yealink BToE Connector starts on your PC automatically, the following window
will appear:

Yealink SIP-T42G Specifications

General

Power requirements	100-240V, DC 5V
Power over Ethernet (PoE)	Yes
Touchscreen	-
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Voice codecs	G.711, G.723, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black, Grey
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	175 mm
Width	212 mm
Height	189 mm