Basic Call Feature
79
- With the optional headset connected, press to activate the headset
mode, and then press , or the Send soft key to place a call using the
headset mode.
The # key is configured as a send key by default. You can also set the * key as the send
key, or set neither. For more information, refer to Key as Send on page 38.
To place multiple calls:
You can have more than one call on your SIP-T42G IP phone. To place a new call during
an active call, do the following:
- Press the line key. The active call is placed on hold.
Enter the desired number using the keypad.
Press , , or the Send soft key.
- Press the Hold soft key to place the original call on hold.
Press the NewCall soft key.
Enter the desired number using the keypad.
Press , , or the Send soft key.
You can press or to switch between calls, and then press the Resume soft key
to retrieve the desired call.
When you are not in another call, you can answer a call in three ways:
Using the handset
Using the speakerphone
Using the headset
Note
Answering When Not In Another Call
Call duration and destination will always appear on the LCD screen of the active call.
You can ignore incoming calls by pressing the Reject soft key or the Silence soft key or the
X key. You can also change the presence status to be Do Not Disturb, and then the phone
will ignore all incoming calls to your phone. For more information, refer to Changing
Presence Status on page 23.
You can forward incoming calls to someone else by pressing the FWD soft key, or to voice
mail by pressing the FWD VM soft key. For more information, refer to Call Forward on
page 94.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
