User Guide for the SIP-T42G IP Phone
78
Using the speakerphone
Using the headset
You can also dial the number first, and then choose the way you want to speak to the
other party.
You can search for the contacts and then dial from the result list. For more information,
refer to Searching for Contacts on page 59.
During a call, you can alternate between Speakerphone, Headset, and Handset modes
by pressing the Speakerphone key, the Headset key, or picking up the handset.
The call duration and the talking mode are visible on the LCD screen. In the figure below,
the call to “Lin Wei” has lasted 4 seconds.
To place a call:
1. Enter the first few continuous characters of the contact name, phone number or the
contact address using the keypad.
You can press the 123 soft key to change the input mode.
The contacts that meet search criteria will appear on the pre-dialing screen.
2. Press or to scroll through the result list and highlight the desired contact.
You can press the Detail soft key to view the detailed information of the highlighted
contact, and then press or to select the desired phone number or
address.
3. Do one of the following:
- Press , , or the Send soft key to place a call using the
hands-free speakerphone mode.
- Pick up the handset to place a call using the handset mode.