Using the VC120 Video Conferencing System
113
Before recording video, you need to insert a USB flash drive into the USB port on the VC120
Codec to store recorded video and make sure the USB feature is enabled. For more information,
please refer to USB Configuration on page 57. The recorded video will be saved in .mkv format
and named as the recorded time and date. Video can be played on either the system itself or on
a computer using an application capable of playing .wav files.
Note
Before recording video, you need to know the following:
When recording video, it is not allowed to play or delete the video from the menu.
When recording video, it is not allowed to capture screenshots, buy you can view and
delete screenshots.
When playing video recording, it is not allowed to record again. But when the video is
paused, you can press to record again.
When receiving or making a call, it is not allowed to record.
When there is an incoming call during recording, the system will quit recording.
When recording during a video call, the record will be finished automatically after the call
ends.
When playing or recording video, it is unavailable to press to return to the idle
screen.
When playing, recording or pausing video, the system will not go to sleep automatically.
If you remove the working USB flash drive or insert another USB flash drive during
recording, the recording will be stopped.
To configure video recording via web user interface:
1. Click on Setting->Video & Audio.
The system supports FAT32 and NTFS format USB flash drive or removable hard drive. When
using the NTFS format, only the first partition is supported.
After the USB flash drive is inserted to the USB port on the VC120 Codec and the USB feature is
enabled, the display device will prompt “USB device available now”.
The icon will appear on the status bar of the display device, and the icon will appear on
the LCD screen of the VCP40 phone.
To Next Page
Loading...
