Yealink W52P Full User Guide

© Gamma 2014. All rights reserved. Confidential.
Auto Answer
When auto answer feature is enabled, you can simply answer the incoming calls by picking up the handset
from the charger cradle without having to press the off-hook key. The auto answer feature works only if the
handset is placed in the charger cradle.
Auto Intercom
The handset can automatically answer an incoming external intercom call and play warning tone only when
there is only one handset subscribed and no call in progress on the handset.
To automatically answer an incoming internal intercom call, you need to enable auto intercom feature on
the handset. The following configuration types of auto intercom feature are available for selection:
 On (Beep On): Auto intercom feature is on. The handset will answer an incoming internal intercom
call automatically and play a warning tone.
 On (Beep Off): Auto intercom feature is on. The handset will answer an incoming internal intercom
call automatically without a warning tone.
 Off: Auto intercom feature is off. You need to answer an incoming internal intercom call by pressing
the Accept soft key.
Speed Dial
Speed dial allows you to perform single-digit dialling to predefined numbers. You can assign the important
numbers of your local directory to the speed dial keys of your handset.
Handset Reset
You can reset individual settings that you have made on the handset. Resetting handset will not overwrite
settings of directory, call history, voice mail and the handset registration to the base station.
Eco Mode
Eco mode greatly reduces the transmission power and signal output when the phone is in the talk mode.
The attenuation range is 20m. When the distance between the base station and the handset is over 20m,
the eco mode is disabled automatically.
Repeater Mode
Repeater mode extends the radio coverage of the base station. The repeater has the same radio coverage
as the base station. This feature is especially useful for users who require mobility in large areas. If the
repeater mode is enabled, and a repeater is registered to the base station, the handset registered to the
base station can be used either in the base station or the repeater coverage area, thereby providing users
with greater freedom in mobility. Later on we will explain how to use the repeater with the base station.
Handset Name
The handset will be assigned a name by default if successfully registered to the base station (i.e. H1, H2
etc). You can personalize the handset name.

Yealink W52P Specifications

General

Caller ID	Yes
Lines quantity	- lines
Answering machine	No
Phonebook capacity	500 entries
Handset type	Wireless handset
Product type	IP Phone
Product color	Black
Maximum indoor range	50 m
Maximum outdoor range	300 m
Voice codecs	G.711, G.723, G.726, iLBC
Number of melodies	9
Display diagonal	1.8 \
Display resolution	128 x 160 pixels
Headset connectivity	2.5 mm
Ethernet LAN (RJ-45) ports	1
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Standby time	100 h
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	108 mm
Width	153 mm
Height	45 mm
Height (max)	50 mm
Height (min)	144 mm