Yealink W52P Full User Guide

© Gamma 2014. All rights reserved. Confidential.
Attended Transfer after answer
To perform an attended transfer before the other party answers the phone, select the Options soft key and
then press Transfer. Or you can press the key directly.
Enter the number or select the handset that you would like to transfer the call to, and then press the
key to dial out. After the other party answers the phone press Transfer or the key.
Conference Call
In order to initiate a conference call, follow the steps below:
 Place a call to User A
 Press the Options soft key and then select Conference
 Enter the number of the User B that you would like to add to the conference, and then press the
or or or the “OK” soft key to dial out.
 When User B answers the call press the Conf. soft key to join all the parties into the conference
bridge.
 To add another User into the conference bridge follow the steps above. Up to 4 parties (including
yourself) can be in the conference call.
 To end the conference call, press the key.
Call Forwarding
There are 3 types of call forwarding that can be managed by the device:
Call Forward Always:
Incoming calls are immediately forwarded to the specified number
Call Forward Busy:
Incoming calls are forwarded to the specified number when the line is busy
Call Forward No Answer:
Incoming calls are forwarded to the specified number if the call is not answered after a period of time.Below
are the steps in order to enable one of the call forwarding options:
 Go to the Main Menu
 Press Call Features ( ) and then Call Forward
 Select the Call Forwarding type that you want
 Provide the relevant information (i.e Number , time) then press save.

Yealink W52P Specifications

General

Caller ID	Yes
Lines quantity	- lines
Answering machine	No
Phonebook capacity	500 entries
Handset type	Wireless handset
Product type	IP Phone
Product color	Black
Maximum indoor range	50 m
Maximum outdoor range	300 m
Voice codecs	G.711, G.723, G.726, iLBC
Number of melodies	9
Display diagonal	1.8 \
Display resolution	128 x 160 pixels
Headset connectivity	2.5 mm
Ethernet LAN (RJ-45) ports	1
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Standby time	100 h
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	108 mm
Width	153 mm
Height	45 mm
Height (max)	50 mm
Height (min)	144 mm