Yealink W52P - Handset Setup and Information; Setting up the W52 H Handset

© Gamma 2014. All rights reserved. Confidential.
If the repeater is placed correctly (overlapping the coverage area of the base station), the handsets can
move freely within the total coverage area while on a call.
LED Status
The DECT repeater has one LED indicator describing the repeater operations. The following table provides
instructions on repeater operations and LED indications:
LED
Indication
Operation
Off
Power off
Red
Slowly flashes
Unregistered, searching for base station
Red
Double flashes
Searching for base station in the registration
mode or performing registration procedure.
Red
Steady on
Registered to base station, ready for use
Red
Shortly flashes
Attempting handset connection