Yealink W52P Full User Guide

© Gamma 2014. All rights reserved. Confidential.
DECT Repeater (RT10)
The Yealink Repeater (RT10) can be deployed to extend the range of the W52P IP DECT phone to cover
areas where reception was previously not available. All the usual handset functions are supported by the
base station in the extended radio range. The repeater, base station and cordless handset employ wireless
connection. In this section we will describe the process to register/de-register a repeater to a base station
and also some tips will be provided on how to deploy a repeater.
Useful information
Repeater has the same radio coverage (up to 300m in unobstructed outdoor areas and up to 50m inside
buildings) as the base station.
Repeater does not increase the quantity of call paths. It shares the call paths with the base station.
Adding a repeater is similar to adding a base station on the multi-cell system.

Yealink W52P Specifications

General

Caller ID	Yes
Lines quantity	- lines
Answering machine	No
Phonebook capacity	500 entries
Handset type	Wireless handset
Product type	IP Phone
Product color	Black
Maximum indoor range	50 m
Maximum outdoor range	300 m
Voice codecs	G.711, G.723, G.726, iLBC
Number of melodies	9
Display diagonal	1.8 \
Display resolution	128 x 160 pixels
Headset connectivity	2.5 mm
Ethernet LAN (RJ-45) ports	1
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Standby time	100 h
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	108 mm
Width	153 mm
Height	45 mm
Height (max)	50 mm
Height (min)	144 mm