EasyManuals Logo

Yealink W52P Full User Guide

Yealink W52P
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
© Gamma 2014. All rights reserved. Confidential.
Supported Call Features
Hold/Resume
You can place an active call on hold. At any time, at most one active call can be in progress on your
handset. You can answer or make another call while placing the original call on hold.
To put a call on Hold press Options soft key and then select Hold.
To resume the call press the Resume soft key.
If 2 calls are on hold at the same time you can use the Up/Down arrow or the Swap soft key to swap
between the two calls
Call Mute
While you are on a call you can mute your microphone so the other party will not be able to hear you.
To mute your microphone press the key. To un-mute the microphone press again the same key.
Redial a call
The redial number list stores the twenty last dialled phone numbers. When the memory of the redial number
list is full, the handset will automatically erase the oldest dialled number when a new number is dialled.
To go to the redial list press the key.
Transfer a call
There are 3 different types of call transfer:
Blind Transfer
To perform a blind transfer during a call, select the Options soft key and then press Transfer. Or you can
press the key directly.
Enter the number or select the handset that you would like to transfer the call to, and then press Transfer
or the key.
Attended Transfer before Answer
To perform an attended transfer before the other party answers the phone, select the Options soft key and
then press Transfer. Or you can press the key directly. Enter the number or select the handset that
you would like to transfer the call to, and then press the key to dial out.
Once you receive the ring back tone and before the other party answers the phone press Transfer or the
key.

Other manuals for Yealink W52P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink W52P and is the answer not in the manual?

Yealink W52P Specifications

General IconGeneral
Caller IDYes
Lines quantity- lines
Answering machineNo
Phonebook capacity500 entries
Handset typeWireless handset
Product typeIP Phone
Product colorBlack
Maximum indoor range50 m
Maximum outdoor range300 m
Voice codecsG.711, G.723, G.726, iLBC
Number of melodies9
Display diagonal1.8 \
Display resolution128 x 160 pixels
Headset connectivity2.5 mm
Ethernet LAN (RJ-45) ports1
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Standby time100 h
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth108 mm
Width153 mm
Height45 mm
Height (max)50 mm
Height (min)144 mm

Related product manuals