Yealink W52P Full User Guide

© Gamma 2014. All rights reserved. Confidential.
How to set up the Yealink W52P
The phone will arrive pre-configured and simply needs to be connected to the internet and powered up.
Your Administrator or installer should know how to do this for you. There are some network/router level
settings that must be applied, or the Horizon service will not work. For further details on these please refer
to the Horizon user guide.
Up to 5 handsets can be registered to a Yealink W52P base station. Usually the handset that comes in the
same box with the base station is pre-associated with it. In case that the handset is not already associated
with the base station, or if you would like to associate more handsets that have been purchased separately
you can find the required steps below.
Register Handset
Press the button on the base station for few seconds. Once the registration LED flashes slowly, this
means that the base station is in the registration mode.
 Press “OK” on the handset to enter the main menu
 Select Settings  Registration  Register Handset
 Once you see the available base station, select it and press “OK”
 Enter the registration PIN which is 0000 and press “Done”
Note1: Once the handset is registered it will automatically get a name such as H1.
Note 2: In order to check that the registration was successful and the device is ready to make/receive calls
go to Main Menu  Status  Line Status
De-register Handset
In order to de-register a handset from the base station, follow the steps below:
 Press “OK” to enter the main menu
 Go to Settings  Registration  De-reg. Handset
 Enter the PIN which is 0000 and press “Done”
 Select the handset that you want to de-register, press “OK” and then “Yes”
Note: You can de-register any handset that is associated with the base station

Yealink W52P Specifications

General

Caller ID	Yes
Lines quantity	- lines
Answering machine	No
Phonebook capacity	500 entries
Handset type	Wireless handset
Product type	IP Phone
Product color	Black
Maximum indoor range	50 m
Maximum outdoor range	300 m
Voice codecs	G.711, G.723, G.726, iLBC
Number of melodies	9
Display diagonal	1.8 \
Display resolution	128 x 160 pixels
Headset connectivity	2.5 mm
Ethernet LAN (RJ-45) ports	1
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Standby time	100 h
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	108 mm
Width	153 mm
Height	45 mm
Height (max)	50 mm
Height (min)	144 mm