| Call Features | 28
Placing an Anonymous Call
You can hide your name and number when you place a call. As a result, the callee receives an anonymous
call without caller identity.
Before you begin
Contact your system administrator to find out if this feature is available on your phone.
Procedure
1. Navigate to OK > Call Features > Anonymous Call.
On the CP930W/DD phone, navigate to Menu > Features > Anonymous Call.
2. Enable local anonymous.
3. Confirm the action.
4. Place a call.
The callee is prompted with an incoming call from anonymity.
If the callee enables anonymous rejection feature, you may be prompted that the callee does not accept
calls from an anonymous number.
Answering Calls
When you receive a call, you can choose to answer it manually or automatically.
• Answering a Call
• Answering a Call When in a Call
• Answering a Call Automatically
Answering a Call
When you receive an incoming call, the phone rings and the screen displays the information of the
incoming call.
Procedure
Do one of the following:
•
Press , or press Accept or Answer.
• Press the Speakerphone key.
•
If a headset is connected, press Accept or the HEADSET key .
Answering a Call When in a Call
You can answer a call when there is already an active call on your phone.
When you are in an active call and an incoming call arrives on the phone, a call waiting tone beeps, and the
incoming call information is displayed.
Procedure
1. On the W56H/W53H, press the down navigation key to select the incoming call.
2. Select Answer.
The active call is placed on hold, and the incoming call becomes active.
Note: You can disable the call waiting feature to reject the incoming call automatically during a
call.
To Next Page
Loading...
Need help?
General
