| Advanced Call Features | 39
Note: Call park is not available on all servers. Check with your system administrator to find out if it
is available on your phone.
• Parking or Retrieving a Call in the FAC Mode
• Parking or Retrieving a Call in the Transfer Mode
• Retrieving a Call with a Retrieve Key
Parking or Retrieving a Call in the FAC Mode
You can park the call to the local extension or the desired extension through dialing the park code.
• Parking a Call in the FAC Mode
• Retrieving a Parked Call in the FAC Mode
Parking a Call in the FAC Mode
You can park a call in the FAC mode directly. When you park a call to the local extension or the desired
extension, the call is held in the same network on your phone.
Before you begin
Your system administrator has set call park in the FAC mode.
Procedure
1. During a call, select Options > Call Park.
On the CP930W/DD phone, select Call Park (Park).
The phone will dial the call park code which is pre-configured.
2. Do one of the following:
• If you want to park the call against the local extension, press the # key.
• If you want to park the call against the desired extension, enter the extension (for example, 4606)
where you want to park the call and press the # key.
If the call is parked successfully, you will hear a voice prompt that the call is parked.
Retrieving a Parked Call in the FAC Mode
You can retrieve a parked call in the FAC mode from any phone within your network.
Before you begin
Your system administrator has set call park in the FAC mode. There is a call parked on the extension. Get
the park retrieve code from your system administrator.
Procedure
1. Dial the park retrieve code.
On the CP930W/DD phone, you can also select Retrieve on the dialing screen.
2. Follow the voice prompt to retrieve:
• Press the # key on the phone where the call is parked.
• Enter the desired extension followed by # (for example, 4606#) on any phone.
Parking or Retrieving a Call in the Transfer Mode
You can park the call to the shared parking lot through a blind transfer.
For some servers, the system will return a specific retrieve park number (park retrieve code) after parking
successfully.
• Parking a Call in the Transfer Mode
To Next Page
Loading...
Need help?
General
