| Advanced Call Features | 40
• Retrieving a Parked Call in the Transfer Mode
Parking a Call in the Transfer Mode
You can park a call in the transfer mode directly. When you park a call to the shared parking lot, the call is
held on your phone.
Before you begin
Your system administrator has set call park in the Transfer mode.
Procedure
During a call, select Options > Call Park.
On the CP930W/DD phone, select Call Park (Park).
The call will be directly transferred to the shared parking lot.
Retrieving a Parked Call in the Transfer Mode
You can retrieve a parked call in the transfer mode from any phone in the same network.
Before you begin
Your system administrator has set call park in the Transfer mode. There is a call parked on the shared
parking lot.
Procedure
Dial the park retrieve code.
The phone will retrieve the parked call from the shared parking lot.
Note: When the W56H/W53H/DD phone is idle, you can use a Retrieve key to retrieve a parked call
directly.
Related tasks
Retrieving a Call with a Retrieve Key
Retrieving a Call with a Retrieve Key
You can easily use a retrieve key to retrieve a parked call quickly.
Before you begin
Check with your system administrator if the FAC or Transfer mode is set on your phone, and if the call park
feature has set for your phone. It is only applicable to W56H/W53H/DD phone.
Procedure
1. Navigate to OK > Settings > Shortcut.
2. Highlight the desired shortcut key and press Change.
3. Select Retrieve.
Note: On the DD phone, navigate to Menu > Features > DSS Keys to configure a Retrieve Park
key.
When there is a call parked on the extension or the shared parking lot, you can press the Retrieve key
on the idle screen, and the handset will dial the configured park retrieve code.
To Next Page
Loading...
Need help?
General
