| Call Features | 30
Rejecting Anonymous Calls
You can reject incoming calls from the callers who have hidden their identities. As a result, your phone will
not ring and you will not be notified of an attempted call.
Procedure
1. Navigate to OK > Call Features > Anon.Call Rejection.
On the CP930W, navigate to Menu > Features > Anon.Call Rejection.
On the DD phone, navigate to Menu > Features > Anonymous Call.
2. Enable local anonymous rejection.
3. Confirm the action.
Rejecting Calls with Do Not Disturb (DND)
You can enable DND to reject all incoming calls automatically when you do not want to be interrupted.
Before you begin
Check with your system administrator to find out if the DND feature is available on your phone.
Procedure
1. Navigate to OK > Call Features > Do Not Disturb.
On the CP930W/DD phone, navigate to Menu > Features > DND.
2. Enable DND.
3. Confirm the action.
The status bar displays the DND icon.
Note: On the CP930W/DD phone, to activate or deactivate DND quickly, select DND when the
phone is idle.
Ending Calls
You can end the current call at any time.
Procedure
Press or End Call.
Muting/Unmuting Audio
You can mute the microphone during an active call so that the other party cannot hear your discussion with
your colleagues.
Procedure
1. Press the mute key during a call to mute the microphone.
The mute icon appears on the phone screen. On the CP930W, the mute touch key LEDs change from
green to red.
To Next Page
Loading...
Need help?
General
