Yeastar Technology S-Series Administrator's Guide

S-Series IP PBX Administrator Guide
39
Called Party Numbering Plan
Select the Called Party Numbering Plan.
Called Party Numbering Type
Select the Called Party Numbering Type.
Presentation Indicator
The PI provides instructions on whether or not the
provided calling line identity is allowed to be presented, or
indicate that the number is not available.
Screen Indicator
The SI provides information on the source and the quality
of the provided information.
ISDN Dialplan
ISDN/telephony numbering plan (Recommendation
E.164)
International Prefix
Dialplan: '(Remote Dialplan:ISDN +) Remote Number
Type: international'.
National Prefix
Dialplan: '(Remote Dialplan:ISDN +)Remote Number
Type:national'.
Local Prefix
Dialplan: '(Remote Dialplan:ISDN +)Remote Number
Type:subscriber'.
Private Prefix
Dialplan: 'Remote Dialplan:private + Remote Number
Type: subscriber'.
Unknown Prefix
Dialplan: '(Remote Dialplan:ISDN +)Remote Number
Type:unknown'.
3) DOD
DOD (Direct Outward Dialing) means the caller ID displayed when dialing out. Before configuring
this, please make sure the provider supports this feature.
 Global DOD
Configure Global direct outward dialing number. DOD (Direct Outward Dialing) is the caller
ID displayed when dialing out. Before configuring this, please make sure the carrier supports
this feature.
 Add one DOD with Multiple Extensions
Enter one DOD number and select multiple extensions.
Figure 5-1 Add One DOD with Multiple Extensions

Yeastar Technology S-Series Specifications

General

Brand	Yeastar Technology
Model	S-Series
Category	PBX
Language	English