YOKOGAWA AQ6370C User Manual

7-46
IM AQ6370C-17EN
:CALCulate:AMARker[1|2|3|4]:MAXimum
Function Detects the peak and sets the specified
advanced marker there.
Syntax
:CALCulate:AMARker[1|2|3|4]:MAXimum
[1|2|3|4]: Advanced marker number
Example
:CALCULATE:AMARKER:MAXIMUM
Description • If the specified advanced marker has not been
assigned, a moving marker will be assigned.
• If the advanced marker number is not
specified, advanced marker 1 will be used.
• This is a sequential command.
• This command can be used on the AQ6370C/
AQ6370D/AQ6373B/AQ6375B.
:CALCulate:AMARker[1|2|3|4]:MAXimum:
LEFT
Function Detects the closest peak to the left of the
current specified advanced marker position and
sets the specified advanced marker there.
Syntax
:CALCulate:AMARker[1|2|3|4]:MAXimum
:LEFT
[1|2|3|4]: Advanced marker number
Example
:CALCULATE:AMARKER:MAXIMUM:LEFT
Description • If the specified advanced marker has not been
assigned, a moving marker will be assigned.
• If the advanced marker number is not
specified, advanced marker 1 will be used.
• This is a sequential command.
• This command can be used on the AQ6370C/
AQ6370D/AQ6373B/AQ6375B.
:CALCulate:AMARker[1|2|3|4]:MAXimum:
NEXT
Function Detects the highest peak whose level is less
than or equal to that of the current specified
advanced marker position and sets the specified
advanced marker there.
Syntax
:CALCulate:AMARker[1|2|3|4]:MAXimum
:NEXT
[1|2|3|4]: Advanced marker number
Example
:CALCULATE:AMARKER:MAXIMUM:NEXT
Description • If the specified advanced marker has not been
assigned, a moving marker will be assigned.
• If the advanced marker number is not
specified, advanced marker 1 will be used.
• This is a sequential command.
• This command can be used on the AQ6370C/
AQ6370D/AQ6373B/AQ6375B.
:CALCulate:AMARker[1|2|3|4]:MAXimum:
RIGHt
Function Detects the closest peak to the right of the
current specified advanced marker position and
sets the specified advanced marker there.
Syntax
:CALCulate:AMARker[1|2|3|4]:MAXimum
:RIGHt
[1|2|3|4]: Advanced marker number
Example
:CALCULATE:AMARKER:MAXIMUM:RIGHT
Description • If the specified advanced marker has not been
assigned, a moving marker will be assigned.
• If the advanced marker number is not
specified, advanced marker 1 will be used.
• This is a sequential command.
• This command can be used on the AQ6370C/
AQ6370D/AQ6373B/AQ6375B.
:CALCulate:AMARker[1|2|3|4]:MINimum
Function Detects the bottom and sets the specified
advanced marker there.
Syntax
:CALCulate:AMARker[1|2|3|4]:MINimum
[1|2|3|4]: Advanced marker number
Example
:CALCULATE:AMARKER:MINIMUM
Description • If the specified advanced marker has not been
assigned, a moving marker will be assigned.
• If the advanced marker number is not
specified, advanced marker 1 will be used.
• This is a sequential command.
• This command can be used on the AQ6370C/
AQ6370D/AQ6373B/AQ6375B.
:CALCulate:AMARker[1|2|3|4]:MINimum:
LEFT
Function Detects the closest bottom to the left of the
current specified advanced marker position and
sets the specified advanced marker there.
Syntax
:CALCulate:AMARker[1|2|3|4]:MINimum
:LEFT
[1|2|3|4]: Advanced marker number
Example
:CALCULATE:AMARKER:MINIMUM:LEFT
Description • If the specified advanced marker has not been
assigned, a moving marker will be assigned.
• If the advanced marker number is not
specified, advanced marker 1 will be used.
• This is a sequential command.
• This command can be used on the AQ6370C/
AQ6370D/AQ6373B/AQ6375B.
7.6 Instrument-Specific Commands

YOKOGAWA AQ6370C Specifications

General

Brand	YOKOGAWA
Model	AQ6370C
Category	Measuring Instruments
Language	English