YOKOGAWA AQ6370C User Manual

7-89
IM AQ6370C-17EN
Remote Commands
1
2
3
4
5
6
7
8
App
Index
:SYSTem:COMMunicate:RMONitor
Function Sets/queries whether the remote monitor
function is enabled.
Syntax
:SYSTem:COMMunicate:RMONitor<wsp>
OFF|ON|0|1
:SYSTem:COMMunicate:RMONitor?
OFF|0: Disables the remote monitor function
ON|1: Enables the remote monitor function
Example
:SYSTEM:COMMUNICATE:RMONITOR OFF
:SYSTEM:COMMUNICATE:RMONITOR? -> 0
Explanation • This is a sequential command.
• This command can be used on the AQ6370C/
AQ6370D/AQ6373B/AQ6375B.
:SYSTem:DATE
Function Sets/queries the system data.
Syntax
:SYSTem:DATE<wsp><year>,<month>,<d
ay>
:SYSTem:DATE?
<year> = Year
<month> = Month
<day> = Day
Example
:SYSTEM:DATE 2006,03,01
:SYSTEM:DATE? -> 2006,03,01
Explanation This is a sequential command.
:SYSTem:DISPlay:TRANsparent
Function Sets/queries whether to make the Interrupt
Window and OVERVIEW Window of the
measurement screen semi-transparent.
Syntax
:SYSTem:DISPlay:TRANsparent<wsp>OFF
|ON|0|1
:SYSTem:DISPlay:TRANsparent?
Response 0 = OFF, 1 = ON
Example
:SYSTEM:DISPLAY:TRANSPARENT OFF
:SYSTEM:DISPLAY:TRANSPARENT? -> 0
Explanation This is a sequential command.
:SYSTem:DISPlay:UNCal
Function Sets/queries whether to display an alarm
message in the event of UNCAL.
Syntax
:SYSTem:DISPlay:UNCal<wsp>OFF|
ON|0|1
:SYSTem:DISPlay:UNCal?
Response 0 = OFF, 1 = ON
Example
:SYSTEM:DISPLAY:UNCAL OFF
:SYSTEM:DISPLAY:UNCAL? -> 0
Explanation This is a sequential command.
:SYSTem:ERRor[:NEXT]?
Function Queries data in an error queue and deletes it
from the queue.
Syntax
:SYSTem:ERRor[:NEXT]?
<integer> = Error number
Example
:SYSTEM:ERROR? -> 100
Explanation This is a sequential command.
:SYSTem:GRID
Function Sets/queries the instrument’s grid setting.
Syntax
:SYSTem:GRID<wsp><grid>
:SYSTem:GRID?
<grid> = Grid setting
12.5 GHZ = 12.5 GHz Spacing
25 GHZ = 25 GHz Spacing
50 GHZ = 50 GHz Spacing
100 GHZ = 100 GHz Spacing
200 GHZ = 200 GHz Spacing
CUSTom = User setting
Response 0 = 12.5GHz
1 = 25GHz
2 = 50GHz
3 = 100GHz
4 = 200GHz
5 = CUSTom
Example
:SYSTEM:GRID 50GHZ
:SYSTEM:GRID? -> 2
Explanation • This is a sequential command.
• With the AQ6373/AQ6373B, the command is
invalid.
• For the AQ6375/AQ6375B,cannot be
executed when in Wavenumber mode.
:SYSTem:GRID:CUSTom:CLEar:ALL
Function Clears the user-specified custom grid and
returns it to the default value.
Syntax
:SYSTem:GRID:CUSTom:CLEar:ALL
Example
:SYSTem:GRID:CUSTOM:CLEAR:ALL
Explanation • With the AQ6373/AQ6373B, the command is
invalid.
• For the AQ6375/AQ6375B,cannot be
executed when in Wavenumber mode.
• This is a sequential command.
:SYSTem:GRID:CUSTom:DELete
Function Deletes the specified grid of the custom grid.
Syntax
:SYSTem:GRID:CUSTom:DELete<wsp><int
eger>
<integer> = Number of a grid to be deleted
Example
:SYSTem:GRID:CUSTOM:DELETE 10
Explanation • With the AQ6373/AQ6373B, the command is
invalid.
• For the AQ6375/AQ6375B,cannot be
executed when in Wavenumber mode.
• This is a sequential command.
7.6 Instrument-Specific Commands

YOKOGAWA AQ6370C Specifications

General

Brand	YOKOGAWA
Model	AQ6370C
Category	Measuring Instruments
Language	English