Deleting a Line
2.
To delete one line, select the line to delete using the rotary knob.
To delete multiple lines, select the first or last line to delete and press the AREA
SELECT soft key.
Select the range of lines to delete using the rotary knob or the arrow keys.
3.
Press the AREA CUT soft key. The specified range of lines is deleted.
To restore the deleted line, press UNDO/LOCAL.
Copying a Line
2.
To copy one line, select the line to copy using the rotary knob or the arrow keys.
To copy multiple lines, select the first or last line to copy and press the AREA
SELECT soft key.
Select the range of lines to copy using the rotary knob or the arrow keys.
3.
Press the AREA COPY soft key. The specified range of lines is copied.
4.
Select a copy destination line using the rotary knob or the arrow keys.
5.
To insert the copied lines, press the PASTE INSERT soft key.
To overwrite with the copied lines, press the PASTE OVER WRITE soft key.
The copied lines are pasted, starting from the line selected as the copy
destination. To restore the pasted contents, press UNDO/LOCAL.
Printing Out a Program List (On the AQ6370C, AQ6373 or AQ6375)
1.
Press the LIST PRINT soft key. The program list is printed by the built-in printer.
Note
The LIST PRINT soft key is disabled if the built-in printer is not installed.
8.1 Editing a Program